mtronpti xo7080 pure sine output smt vcxo p/n: xo 7080 - xxx features: pure sine - output vcxo low height: 0.155 max low - g: < 0.3ppb/g worst case axis option available compatible with automated assembly processes; including post reflow aqueous and non - aqueous cleaning applications: avionics satc om cyber security and communication systems electrical specifications for representative 125mhz vcxo: unless otherwise specified; t= +25 c, v s = +5v dc , v c = + 2.5 v dc , load= 50 parameter symbol min. typ. max. units conditions nominal frequency f o 10 3 00 mhz frequency stabilities vs. temperature range - 20 +20 ppm - 40c to +85c vs. supply voltage - 0.5 +0.5 ppm 5% change in voltage vs. load - 0.5 +0.5 ppm 5% change in load aging 1 st year - 1.0 +1.0 ppm rf output output type sinewave output load 50 10 % level - 3 0 +3 dbm in a 50 load frequency adjustment method external voltage tuned tuning slope negative tuning voltage v tune 0 +5 v dc tuning range - 25 +25 ppm modulation bandwidth 3 khz input impedance 10 k ? other parameters ssb phase noise under static conditions - 70 @ 10hz offset - 97 @ 100hz offset - 127 @ 1khz offset - 150 @ 10khz offset - 150 @ 100khz offset g - sensitivity 0.5 ppb/g worst case axis warm - up time f/f 5 minutes to be within 100ppb, @ 25?c, supply voltage & power consumption supply voltage v s .75 5.0 5.25 v dc current draw 3 ma environmental conditions: operating temperature ot - 40 +85 c non - operating temperature - 55 +105 c 1 of 2 the information contained herein is proprietary to mtronpti and is submitted in confidence. this information may not be copied or divulged without written permission from mtronpti.
mtronpti xo7080 pure sine output smt vcxo p/n: xo 7080 - xxx shock and vibration: three (3) ? sine shock pulses of the given force and duration on each of the three (3) axis. the vcxo shall operate during and after the shock pulses. direction: force duration ( msec ) vertical: 10 s 3 to 5 front to ack: 80 s 3 to 5 side to side: 80 s 3 to 5 vcxo shall operate for periods up to 2 - hours duration when subjected to any of the vibration in the given ranges, with the corresponding input amplitude listed. the requirement shall be met regardless of the direction of the vibration. frequency (hz) input amplitude (inches) C 15 0.0 figure 1 - xo7080 outline drawing figure 2 C recommended pad layout figure 3 C recommended reflow profile data sheet revision table: date rev. orig. details of revision 12 - 28 - 15 a dd preliminary draft 2 of 2 the information contained herein is proprietary to mtronpti and is submitted in confidence. this information may not be copied or divulged without written permission from mtronpti.
|